How to maintain and maintain the vacuum laminating machine? Next, I will introduce the maintenance method.
1. The workbench should be kept clean to prevent dust and sawdust from falling on the workbench. Regularly clean the air filter to prevent clogging and avoid affecting product quality.
2. The vacuum pump oil should be replaced for the first time of accumulative use for about one month. Afterwards, check the vacuum pump oil level every week. If the oil level is lower than 1/3 of the vernier, it should be refilled immediately. The vacuum pump uses vacuum pump special oil. Before changing the oil, the vacuum pump must run for 30 minutes to make the oil thinner, then stop the pump, drain the oil, and open the air inlet to run for 1-2 minutes. At this time, a small amount of clean oil can be slowly added from the suction port to replace the oil in the oil cavity.
3. During normal operation, all guards of the equipment must not be removed to avoid accidents.
4. Pay close attention to the operation of the equipment during the production process, and find that the problem is solved in time. It is an electrical fault and should be handled by professionals.
The above has introduced the operation method and maintenance content of the vacuum laminator. I hope that the above content can help you better understand and use the vacuum laminator.
27 Apr, 2021
How to check the quality of the laminating machine after laminating, after the laminating machine is adjusted, when the product is sent to the paper feeding mechanism for laminating, we can obtain samples for inspection. Please note: Use a small amount of product for inspection before laminating, which can avoid a large amount of product waste. After the inspection is qualified, mass production can be carried out.
27 Apr, 2021
Many friends on the Internet have asked, can the finished photo machine be used without laminating? China JIALITE is here to analyze it specifically for you, and hope it will be helpful to you or our customers!
25 Apr, 2021
When a user buys a laminating machine, he must first choose a manufacturer of the laminating machine, because only by choosing a better manufacturer can the quality of the entire equipment be guaranteed, so how can the user deal with such a manufacturer? To choose, first of all, it is necessary to allow users to compare the manufacturers in terms of scale, because for manufacturers, they are naturally larger and more powerful, and they also have their own formal advantages in their production.
25 Apr, 2021
In contrast, users should still choose branded laminating machine manufacturers. It is precisely because they have many advantages that they can greatly improve the quality of this equipment. So what advantages do they have? First of all, it lies in the advantages of strength. Only when its production strength is correspondingly improved, will the advantages of the entire equipment become more obvious, such as what kind of technology and design it uses in production. What kind of technology and so on.
THE LEADER OF PACKAGING MACHINERYCONTACT US